OutBack, SkyBox Battery or Battery-Less Inverter

OutBack SBX5048-120/240 SkyBox Grid-Hybrid Inverter, 5000W, 120/240VAC, 60Hz, 48VDC, GFCI/AFCI, NEMA 3R, UL 1741 SA SkyBox SBX5048-120/240 SkyBox Grid-Hybrid Inverter makes smart solar simple with an advanced technology single-box design, and represents a breakthrough in the field of advanced power conversion, processing and control. The fully integrated design of the SkyBox system eliminates external charge controllers and communication boxes, significantly cutting installation time and cost. Ease-of-installation makes this energy solution ideal for anyone interested in following the market’s move towards battery-based systems. The SkyBox SBX5048-120/240 hybrid grid-tie inverter can be used with or without a battery. When used with a battery it can be used to enhance self-supply of solar energy. This is useful when net-metering or grid feed is not available, or not financially advantageous. This system uses DC coupling for both the solar and the connection to the battery system for greater overall efficiency. The SkyBox uses any commonly available 48 VDC battery bank (lead type, flooded, AGM, or gel, and many Lithium batteries). Multiple Functions of the SkyBox SBX5048-120/240 SkyBox Grid-Hybrid Inverter Solar - Harvests photovoltaic (PV) energy from a PV array using maximum power point tracking (MPPT) technology. This energy can be used to run loads, for battery charging, for grid-tied activity, or for other purposes. Grid - Connects to the utility grid to charge batteries and run loads. It can also sell to the grid, or interact with the grid in other ways if sell-back is not permitted. Load - Uses an inverting function to convert battery (DC) power to AC output. It can run loads in the absence of an AC source. If an AC source is present (utility grid or generator), the SkyBox can switch to run loads directly from the AC source. The inverting function can also work with the utility grid. It can add PV and battery power to support loads (self-supply) if the AC supply is not large enough. It performs similar activity for the grid-interactive (sell-back) and GridZero functions. It can also “AC couple” power from another grid-tied inverter to the grid. Battery - Uses a battery source to run loads, minimize consumption of grid power, and other applications. It uses a three-stage cycle to recharge batteries. It can also monitor usage and track the battery state of charge (SOC). Generator - Control a generator to run loads and charge batteries. The generator can be started with a manual command or programed to run automatically with the Advanced Generator Start (AGS) function. The generator can start or stop according to battery state, time of day, or several other external conditions. PV input voltage range is 200-600VDC, allowing longer PV strings. Compliant with California Rule 21 and Hawaii 14H grid support requirements. Features 5,000 W backup power at 120/240 VAC Fast and Easy to Install - Balance of Systems in one box Monitor and control over the internet using OPTICS RE Internal Arc Fault Circuit Interrupter (AFCI) for added safety per NEC 2011: 690.11 Maximum back feed to array is <8ms Built-in battery system monitoring NEMA 3R outdoor rated Meets CA rule 21 and HI 14H grid connection requirements New EMS 2.0 Features Compatibility with the widest variety of 48V battery chemistries on the market today Configurable battery discharge current limit Built-in Module-Level Monitoring Lithium SoC Tracking Drop down menu for quick selection of third-party lithium (SimpliPhi, Blue Ion, etc) EMS 2.0 Battery Compatibility EnergyCell Pure Lead Runtime SimpliPhi LG Chem Blue Ion EnergyCell NanoCarbon EnergyCell PLC EnergyCell RE High Capacity EnergyCell OPzV